In this article, we will discuss how to upgrade your Leagoo Lead 1 with the latest firmware download flash. Firmware updates are important for improving the performance of your device and fixing any bugs that may be present in the previous version. The process of upgrading your firmware is simple and can be done by following these easy steps.

Step 1: Download the Latest Firmware

The first step is to download the latest firmware for your Leagoo Lead 1. You can find the latest firmware on the official Leagoo website or by doing a quick search on the internet. Make sure that you download the correct firmware for your specific device model and variant.

Step 2: Backup Your Data

Before proceeding with the firmware upgrade, it is crucial to back up all your important data such as contacts, messages, photos, and videos. This is because the firmware upgrade process will erase all the data on your device, and you do not want to lose any important information.

Backing Up Data Using Google Drive

  • Open the Google Drive app on your Leagoo Lead 1
  • Tap on the three horizontal lines on the top left corner of the screen
  • Select «Settings» from the drop-down menu
  • Tap on «Backup & reset»
  • Toggle on «Back up my data» and select your Google account to store the backup

Step 3: Install the Flash Tool and USB Drivers

To upgrade your firmware, you need to have the SP Flash Tool installed on your computer along with the necessary USB drivers for your Leagoo Lead 1. You can download the SP Flash Tool and USB drivers from the internet.

Step 4: Extract the Firmware Downloaded

After downloading the firmware, extract it to a folder on your computer. You can use any extraction software such as WinZip or 7-Zip for this purpose.

Step 5: Open SP Flash Tool and Load the Firmware

Open the SP Flash Tool on your computer and click on «Scatter-loading». Navigate to the folder where you extracted the firmware and select the scatter file with «.txt» extension.

Step 6: Connect Your Leagoo Lead 1 to the Computer

Connect your Leagoo Lead 1 to your computer using a USB cable. Make sure that your device is turned off before connecting it to the computer.

Step 7: Start the Firmware Upgrade Process

Once your device is connected to the computer, click on the «Download» button in the SP Flash Tool. The firmware upgrade process will start, and it may take a few minutes to complete. Do not disconnect your device from the computer during the upgrade process.

Step 8: Finish the Firmware Upgrade

When the firmware upgrade process is complete, you will see a green circle in the SP Flash Tool. This means that the upgrade was successful. Disconnect your Leagoo Lead 1 from the computer and turn it on. The device will take a few minutes to boot up, and all your data will be erased.

Step 9: Restore Your Data

After the firmware upgrade, you can restore your backed up data to your Leagoo Lead 1. Follow the same steps as mentioned in Step 3 to access the «Backup & reset» settings and tap on «Restore» to restore all your data.


Upgrading your Leagoo Lead 1 with the latest firmware download flash is an important process that helps improve the performance of your device. Following these easy steps will make the firmware upgrade process simple and hassle-free. Remember to always back up your data before upgrading your firmware to avoid losing any important information.